主页 » 产品 » Attiro ZH

Attiro ZH

Saving money and the planet while cleaning out your violet chemistry-free plates? Use Attiro ZH, a clean-out unit that uses a unique cascade concept and zero heat.
Attiro ZH

Meet Attiro ZH, the high-speed clean-out unit for your violet chemistry-free plates. Its groundbreaking cascade technology makes your operations both more productive and sustainable, as the concentrated gum is reused in three cascading sections. In this way, the non-imaged areas are effectively removed and there is no risk of oxidizing. The result: minimal gum consumption and little waste for a maximal clean-out effect. Full maintenance, with our dedicated circulation cleaner ATTIRO CareClean, is only required after 8,000 m².

The addition of the Attiro Cleaning Module (ACM) even extends the main cleaning cycle for Attiro COUs to 12,000 m² of plate consumption. Furthermore, the two intermediate cleaning processes at 4,000 and 8,000 m² are executed as part of an automated process that starts with a simple keystroke on the Attiro display and requires no further intervention from the operator.

The Attiro ZH clean-out unit forms a very attractive solution combined with the Avatar V-ZH preheat-free chemistry-free printing plate, and the Advantage N platesetters.

主要优势

  • No preheat unit results in reduced CAPEX, up to 80% energy savings, more floor space, and no buckling of plates because of heating/cooling
  • Minimal gum consumption for maximal clean-out effect; less transport of gum bottles
  • Extensive bath life,  with full maintenance only required after 8,000 m² (or 12,000 m² when the Attiro Cleaning Module is installed)
  • Fully flat plate transport through the clean-out unit leaves plates unbent by rollers
  • Easy visual check and no mix-ups on press thanks to high-contrast image on the gummed plate
  • High speed (up to 400 plates per hour) makes it the perfect match for high production, heavy-duty environments

产品影片

E立方(ECO³)

爱克发致力于可持续创新发展,提出E立方(Eco³)理念,我们的E立方印刷材料、E立方印刷软件、E立方车房耗材,让您的印前和印刷操作更环保、更具成本效益并更易于操作和维护。E立方(Eco³)通过无与伦比的省墨和印刷标准化软件,从印前延伸到印刷,减少准备时间与纸张浪费。

E立方(Eco³)的最终目标:为您的整个印刷业务带来更多价值!

为您的整个印刷业务带来更多价值

独特的级联概念

CLEANING MODULE
Gum 1: 95 % of all non-imaged areas are removed from the plate.

Gum cascades into the first tank from the second tank and is sprayed on the plate to remove the non-imaged areas. The imaged areas are bound to the substrate and therefore not washed away by the gum. As most of the clean-out happens in this first gum section, it contains most of the cleaned out emulsion. The exhausted gum is drained off.

Gum 2: The remaining non-imaged areas are removed from the plate.

The gum mix from the third tank cascades into the second tank, removes the remaining non-imaged areas, and then cascades into the first tank.

Gum3: A layer of fresh gum is applied to prevent the plate from oxidizing the grained and anodized aluminum.

The final clean-out step is carried out with diluted gum fresh from the bottle, thus ensuring a perfectly clean plate. The fresh gum and water from the tank in the third section then cascade into the tank of the second section.

Dryer section: The plate is dried to enable immediate handling, independent of format.

Hot air is blown through a pair of air tubes, which dries the plate on both sides. As a result, further handling of the plate is immediately possible.

LED curing

A low energy LED bar takes care of final curing of the plate in the drying section.

产品资料

技术规格

Attiro ZH

Performance
Plate type Avatar V-ZH preheat-free chemistry-free photopolymer offset plates
Plate width, min.-max. 200-710 mm (7.9-28”)
Plate length, min. 275 mm (10.9”)
Plate thickness, min.-max. 0.15-0.30 mm (0.006-0.012”)
Plate speed 40-300 cm/min
Plate volume Up to 400 plates/hour
Brush speed Gum 1: 200 rpm (fixed)
Gum 2: 150 rpm (fixed)
Water Total hardness < 6° dH or Osmosis water
Connection: 3/4 gas
Max. pressure: 3 bar
Drain tube: inner diameter 25 mm
Mechanical specifications
Temperatures Dryer min.-max.: 49-70°C (120-158°F)
Tank volumes Gum 1: 7.5 lit. (1.98 US gal.)
Gum 2: 5.5 lit. (1.45 US gal.)
Gum 3: 4.5 lit (1.19 US gal.)
Noise emission (max.) < 70 dB
Physical specifications
Weight cleaning module
incl. crate
285 kg (628 lb)
385 kg (848 lb)
Dimensions cleaning module (w x d x h)
incl. crate
1423 x 1270 x 980-1230 mm (56.0 x 50.0 x 38.6 to 48.4”)
1550 x 1350 x 1220 mm (61.0 x 53.2 x 31.5”)
Electrical specifications
Power supply EUR Single phase: 1W + N + PE    230V / 9.0 Amps, 50/60Hz.
USA: Single phase: 2W + PE   208 – 230V / 9.0 Amps, 50/60Hz.
Voltage tolerances +/- 10%
Power EUR/US 2000 Watt hour
Heat dissipation 6824 BTU
Energy consumption (under standard working conditions for 1 h) Ready (Standby): 0.03 kWh
Processing: 0.5 kWh
Logic off (device switched off via touch panel only, main switch remains on): 0.01 kWh