Arkana
Deploying Agfa’s revolutionary patented cascade system, the Arkana smart plate processor saves printers both time and money, while making operations more ecological and convenient.
Building on Agfa’s ECO³ framework, the Arkana smart processor offers consistent, high-quality plate processing with minimal chemistry usage and maintenance, thus allowing printers to further reduce their CO2 footprint. Maximum throughput on all 8-up and VLF CtP lines makes it the perfect match for high-production and heavy-duty environments.
Arkana features a small developer tank, drastically lowering replenishment rates and considerably reducing chemicals consumption. Thanks to Agfa’s patented gum cascade system in which the gum both cleans the plate and protects it with a finishing layer, Arkana no longer requires water for plate rinsing. All in all, it produces up to 50% less collectable waste compared to other systems on the market. In addition, its long bath life drastically reduces maintenance frequency, while the clean chemistry used in the system reduces maintenance time.
Arkana makes a perfect combination with the Energy Elite Eco printing plate.
Key benefits
- Absolute minimum of replenishment results in a chemistry consumption that is up to more than six times less compared to conventional thermal processing systems
- Long bath life, extremely low replenishment rates and the total elimination of rinse water result in a drastic reduction of waste up to 50% compared to conventional thermal systems – and thus less packaging, transport and haulage costs
- Bath life of up to 15,000 m² of plates results in a minimal cleaning frequency, creating higher up-time and avoiding maintenance costs
- High-performing and consistent system
- Energy Elite Eco’s clean chemistry allows for easy and rapid cleaning
- Wide operational processing latitude with the Energy Elite Eco printing plates
E立方（ECO³）
Agfa is committed to sustainable innovation that focuses on ecology, economy, and extra convenience—or ECO³. Our hardware, software and consumables make your prepress and printing operations cleaner, more cost-effective and easier to operate and maintain. The ultimate goal? More value for your entire printing business!
Features
Small-volume developer section
The Arkana smart processing unit is designed with a 10 liter developer tank. In combination with Energy Elite Eco’s clean chemistry this small tank allows for an extended bath life of up to 15,000 m² and extremely low replenishment rates. Total developer consumption is only a fraction (more than 10x less) of that of current systems. A long bath life and a minimum use of chemicals results in a lower cleaning frequency and a drastic reduction of collectable waste.
Cascaded gum sections
As Arkana is using the cascaded gum section for cleaning the plate as well as applying a protective layer, the use of rinse water can be eliminated. This is part of Agfa’s Eco³ framework to reduce the consumption of valuable resources of our planet.
A thin layer of gum is put on the plate to prevent plate oxidation, and protects it for handling in the press room. The gum is optimized for optimal protection and only consumes 6ml/m².
Hot air dryer
The plate is dried by hot air, enabling immediate further handling.
Brochures
Related products
Technical Specs
| Plates | Energy Elite Eco |
| Plate type | Positive-working, digital thermal offset plate |
| Plate width, min.-max. | 200-850 mm (7.9-33.5″) |
| Plate length, min. | 300 mm (11.8″) |
| Plate thickness, min.-max. | 0.15-0.40 mm (0.006″-0.015″) |
| Platesetters | 830nm thermal platesetters |
Performance |
|
| Plate speed | 150 cm/min (59”/min) |
| Plate throughput | 95 plates/h (landscape 745 x 605 mm) |
| 67 plates/h (portrait 1030 x 790 mm) | |
| Water for chemistry dilution | Total hardness < 6° dH |
| Temperatures | Developer: min.-max.: 20-28°C (68-82.4°F) |
| Dryer: min.-max.: 20-70°C (68-158°F) | |
| Noise | 70 dB |
Physical specifications |
|
| Dimensions (width, length) | 1424 x 1172 mm (56.1″ x 44.2″) |
Electrical specifications (EUR) |
|
| EUR | Single-phase: 1W + N + PE – 230V / 15 Amps, 50/60 Hz |
| USA | Single-phase: 2W + PE – 208-230V / 15 Amps, 50/60 Hz |
| Power | 2.7 kWatt (9213 BTU) |
Compliancy |
|
| Approvals | CE standards – cTÜV – US certification |
Options |
|
| Accessories | Feed table / Exit table / Drip tray |
| Interface for platesetters | Included for all Agfa platesetters |
| Optional for third-party platesetters | |
| Plates | Energy Elite Eco |
| Plate type | Positive-working, digital thermal offset plate |
| Plate width, min.-max. | 200-1250 mm (7.9-49.2″) |
| Plate length, min. | 300 mm (11.8″) |
| Plate thickness, min.-max. | 0.15-0.40 mm (0.006″-0.015″) |
| Platesetters | 830nm thermal platesetters |
Performance |
|
| Plate speed | 150 cm/min (59”/min) |
| Plate throughput | 95 plates/h (landscape 1030 x 790 mm) |
| Water for chemistry dilution | Total hardness < 6° dH |
| Temperatures | Developer: min.-max.: 20-28°C (68-82.4°F) |
| Dryer: min.-max.: 20-70°C (68-158°F) | |
| Noise | 70 dB |
Physical specifications |
|
| Dimensions (width, length) | 1824 x 1172 mm (71.7″ x 44.2”) |
Electrical specifications (EUR) |
|
| EUR | Single-phase: 1W + N + PE – 230V / 15 Amps, 50/60 Hz |
| USA | Single-phase: 2W + PE 208-230V / 15 Amps, 50/60 Hz |
| Power | 2.7 kWatt (9213 BTU) |
Compliancy |
|
| Approvals | CE standards – cTÜV – US certification |
Options |
|
| Accessories | Feed table / Exit table / Drip tray |
| Interface for platesetters | Included for all Agfa platesetters |
| Optional for third-party platesetters | |
| Plates | Energy Elite Eco |
| Plate type | Positive-working, digital thermal offset plate |
| Plate width, min.-max. | 400-1500 mm (7.9-59.1″) |
| Plate length, min. | 300 mm (11.8″) |
| Plate thickness, min.-max. | 0.15-0.40 mm (0.006″-0.015″) |
| Platesetters | 830nm thermal platesetters |
Performance |
|
| Plate speed | 150 cm/min (59”/min) |
| Plate throughput | 80 plates/h (landscape 1030 x 790 mm) |
| 49 plates/h (portrait 1524 x 1143) | |
| Water for chemistry dilution | Total hardness < 6° dH |
| Temperatures | Developer: min.-max.: 20-28°C (68-82.4°F) |
| Dryer: min.-max.: 20-70°C (68-158°F) | |
| Noise | 70 dB |
Physical specifications |
|
| Dimensions (width, length) | 2074 x 1172 mm (81.7″ x 44.2″) |
Electrical specifications (EUR) |
|
| EUR | Single-phase: 1W + N + PE – 230V / 15 Amps, 50/60 Hz |
| USA | Single-phase: 2W + PE 208-230V / 15 Amps, 50/60 Hz |
| Power | 2.7 kWatt (9213 BTU) |
Compliancy |
|
| Approvals | CE standards – cTÜV – US certification |
Options |
|
| Accessories | Feed table / Exit table / Drip tray |
| Interface for platesetters | Included for all Agfa Graphics platesetters |
| Optional for third-party platesetters | |